Avee microphone boom (with windshield)
Original price was: 23,00 €.15,00 €Current price is: 15,00 €.
The Avee noise cancelling microphone is a ‘flexible rod type’ and can easily be adjusted for a perfect fit.
The silicon enforced root of the microphone boom makes it extremely stable; yet easy to move when drinking and eating.
The microphone is designed with barbs to effectively prevent the microphone wind shield falling off.
The microphone should be placed as close to the mouth as possible, and the flat surface of the mic and the white spot on the mic root should be facing your mouth.
The Avee145 microphone boom can easily be detached from the Avee microphone housing and be exchanged.
The microphone boom is connected to the main circuit board inside the microphone housing with a micro USB connector.
Two lengths are available for the old microphone boom, NG version: 140mm (stiff) and 165mm (thin).
**Note: if your Avee microphone is older than July 2018, the boom cannot be replaced. The first generation of Avee microphone does not have a detachable boom.**
Description
*CHOOSING THE CORRECT MICROPHONE LENGTH
It is very simple to find the correct microphone length by following these steps:
- Get a tape measure and a pencil .
- Stick the pencil (carefully) into your right ear. Do not let it fall on the inside.
- Measure the direct distance between the pencil at your ear and center of mouth.
- If the measured distance is less than 155mm:
Chose the 140mm microphone boom. - If the distance is more than 155mm
Choose the 165mm microphone boom.
*This only applies to the NG’s version boom, not the Ultimate.
Additional information
| Weight | 0,2 kg |
|---|---|
| Dimensions | 16 × 1 × 1 cm |
| Flexible microphone boom type | Old stiff version – 140mm length (fits on Avee from July 2018-February 2024), Old thin version – 165mm (fits on Avee from July 2018-February 2024), Ultimate version (Avee from March 2024) |
| CountryOrigin | CN |
| hs_code | 85183000 |






